Newsletter
* E-Mail:
First Name:
Last Name:

Bilt Hamber Clay Bar - Medium

Bilt Hamber Clay Bar - Medium
10.95 Brand New 8 In stock! Order now!
Bilt Hamber
Brand: Bilt Hamber
Product Code: Bilt Hamber Clay - Medium
Weight: 260 g
Availability: In Stock
Price:£10.95

Qty:        


BILT HAMBER AUTO CLAY MEDIUM
Bilt Hamber medium clay bar is an easy-to-use paint cleaning clay that provides a fast and efficient method for removing embedded contamination from vehicle paints and clear coat finishes. The extremely small and soft particles that make up the soft pliable mass ensure that the clay is as gentle as possible to the paint surface while imparting a powerful pulling action on the embedment. Needing only tap water as a lubricant, or a lubricant such as Bilt Hamber auto qd the big 200g bar is economic, efficient and made in England. Supplied in a quality storage box and with full detailed instructions.

Contamination can consist of tiny metallic particles from rail dust, brake dust and industrial fallout; or non-metallic substances such as tree sap, bird droppings or insect residue. It affects all paint finishes and can cause serious damage when left untreated. Surprisingly, even brand-new cars and trucks can suffer from paint contamination. Metallic contamination is perhaps the worst offender; whilst stuck into the paint surface it corrodes and expands leading to the onset of paint film destruction.

Paint contamination can be felt as a rough or gritty texture on the freshly cleaned paint's surface.

This contamination cannot be removed by washing, waxing and/or polishing.

To assess the degree of contamination on you car's finish simply rub your fingers gently over the freshly washed paint - to magnify the sensation place a piece of cellophane beneath your finger tips and gently rub back and forth - if your paint needs to be clayed you will feel the gritty texture. It is usual to find that horizontal panels such as bonnet roof and boot lid are the most affected.

Auto-clay removes these particles effortlessly from contaminated surfaces leaving a glass smooth ultra clean finish perfectly prepared for the application of waxes and other final stage products.

Competing clays require the use of special lubricants. Bilt-Hamber Laboratories auto-clay differs as its formulation enables normal tap water to provide the necessary lubrication. Some clay bars contain surfactants such as powdered detergents or soaps. Long-term use of surfactants can have adverse effects on paint systems - auto-clay contains no surfactants detergents soaps or other soluble materials.

 

Before using Bilt Hamber Auto Clay Medium thoroughly wash your car to remove any loose dirt. Direct sunlight should not fall on your car’s surface, and it’s best if the work area is relatively cool, but not cold.

To use auto-clay spray water with a plant mister on a small area of your car and rub the bar back and forth with light pressure. auto-clay should glide across your paint, keep the paint surface wetted thoroughly. auto-clay must not be used dry. Listen carefully - at first you will hear the bar as it pulls the particles away from the paint, the noise and friction will disappear quickly.

After a few passes with auto-clay, rub your fingers over the area to feel if the surface contamination was removed. Keep rubbing until all contamination is gone. Finally, wipe the clay residue off with a soft terrycloth towel. Just like waxing, work in small areas.

What you should see coming off of the car and depositing itself on the clay bar is a reddish brown residue, this is what you want to see. As the clay bar becomes soiled, simply fold it over squash it out and keep going. Under no circumstances should the clay bar be used if dropped on the ground, inside or out! The clay bar is good for about 4 or 5 cleans on the average sized car. Once the paint is clean, wax your car immediately.