CARPRO DENIM ORANGE PEEL REMOVL PAD
Equivalent to 2000 grit Sandpaper
The CarPro Denim Orange Peel Removal pads allow you to remove or substantially reduce orange peel in the clear coat without sanding. While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the refining stages needed afterwards.
PLEASE NOTE: THESE PADS ARE AGGRESIVE AND DECEPTIVE. They don't dull the paint like sanding so it may appear you aren't removing paint but you most certainly are. You must test these on a test panel first and learn how to use them first. Use LITTLE TO NO PRESSURE and observe the paint temperature often. DO NOT USE WITHOUT UTILISING A PAINT GAUGE OFTEN.
Remove Orange Peel and deep defects while simultaneously polishing paint
Equivalent to 2000 grit sandpaper with out the dulling of paint and sanding haze
Remove Orange Peel without sanding
Orange peel removal without the haze generated by sanding
Breather perforations to avoid paint dust buildup on pad and help keep heat down
Polish the paint while removing the ridges of orange peel
Less dust and clean up prior to finishing polish
Attach to hook loop backing plate on a Rotary polisher
Prime pad with CarPro Fixer
Apply a few drops to paint or pad according to your skills and preference
Work a 2' x 2' section or larger to keep heat down as needed but remember the larger the area the more time it will take to level orange peel and defects.
Begin working polish on low speed for a pass or so.
Step up speed to approx. 1200 rpm (adjust as needed)
With proper lighting observe the level of orange peel removal while you work
Apply more polish if needed or a spray of water on pad to re-activate lubricants
When satisfied with orange peel and defect removal slow speed, ending at 600 rpm as you finish down the polish
Refine finish with a foam pad or microfiber pad and polish
Note that these pads are the equivalent of 2000 grit sandpaper
Please only use these pads if you are sure the orange peel is in the upper (clear coat) and not the color coat layer
Be careful near edges and body lines or avoid completely if you are not entirely secure in your knowledge of heavy defect removal
Do not use without knowledge of clear coat thickness in conjunction with a paint thickness gauge
Made in: Japan
Pore Size: 80ppi
Foam Hardness: 3kpa
Material: Denim Surface with hook and loop backing
Color: Denim Blue